Lipid Nanoparticle Encapsulation Empowers Poly(I:C) to Activate Cytoplasmic RLRs and Thereby Increases Its Adjuvanticity.

Poly(I:C) is a synthetic analogue of dsRNA capable of activating both TLR3 and RLRs, such as MDA-5 and RIG-I, as pathogen recognition receptors. While poly(I:C) is known to provoke a robust type I IFN, type III IFN, and Th1 cytokine response, its therapeutic use as a vaccine adjuvant is limited due to its vulnerability to nucleases and poor uptake by immune cells. is encapsulated poly(I:C) into lipid nanoparticles (LNPs) containing an ionizable cationic lipid that can electrostatically interact with poly(I:C). LNP-formulated poly(I:C) triggered both lysosomal TLR3 and cytoplasmic RLRs, in vitro and in vivo, whereas poly(I:C) in an unformulated soluble form only triggered endosomal-localized TLR3. Administration of LNP-formulated poly(I:C) in mouse models led to efficient translocation to lymphoid tissue and concurrent innate immune activation following intramuscular (IM) administration, resulting in a significant increase in innate immune activation compared to unformulated soluble poly(I:C). When used as an adjuvant for recombinant full-length SARS-CoV-2 spike protein, LNP-formulated poly(I:C) elicited potent anti-spike antibody titers, surpassing those of unformulated soluble poly(I:C) by orders of magnitude and offered complete protection against a SARS-CoV-2 viral challenge in vivo, and serum from these mice are capable of significantly reducing viral infection in vitro.

Hapten/Myristoyl Functionalized Poly(propyleneimine) Dendrimers as Potent Cell Surface Recruiters of Antibodies for Mediating Innate Immune Killing.

Recruiting endogenous antibodies to the surface of cancer cells using antibody-recruiting molecules has the potential to unleash innate immune effector killing mechanisms against antibody-bound cancer cells. The affinity of endogenous antibodies is relatively low, and many currently explored antibody-recruiting strategies rely on targeting over-expressed receptors, which have not yet been identified in most solid tumors. Here, both challenges are addressed by functionalizing poly(propyleneimine) (PPI) dendrimers with both multiple dinitrophenyl (DNP) motifs, as anti-hapten antibody-recruiting motifs, and myristoyl motifs, as universal phospholipid cell membrane anchoring motifs, to recruit anti-hapten antibodies to cell surfaces. By exploiting the multivalency of the ligand exposure on the dendrimer scaffold, it is demonstrated that dendrimers featuring ten myristoyl and six DNP motifs exhibit the highest antibody-recruiting capacity in vitro. Furthermore, it is shown that treating cancer cells with these dendrimers in vitro marks them for phagocytosis by macrophages in the presence of anti-hapten antibodies. As a proof-of-concept, it is shown that intratumoral injection of these dendrimers in vivo in tumor-bearing mice results in the recruitment of anti-DNP antibodies to the cell surface in the tumor microenvironment. These findings highlight the potential of dendrimers as a promising class of novel antibody-recruiting molecules for use in cancer immunotherapy.

Potent Lymphatic Translocation and Spatial Control Over Innate Immune Activation by Polymer-Lipid Amphiphile Conjugates of Small-Molecule TLR7/8 Agonists.

Uncontrolled systemic inflammatory immune triggering has hampered the clinical translation of several classes of small-molecule immunomodulators, such as imidazoquinoline TLR7/8 agonists for vaccine design and cancer immunotherapy. By taking advantage of the inherent serum-protein-binding property of lipid motifs and their tendency to accumulate in lymphoid tissue, we designed amphiphilic lipid-polymer conjugates that suppress systemic inflammation but provoke potent lymph-node immune activation. This work provides a rational basis for the design of lipid-polymer amphiphiles for optimized lymphoid targeting.

A versatile method for the selective core-crosslinking of hyaluronic acid nanogels via ketone-hydrazide chemistry: from chemical characterization to in vivo biodistribution.

The development of biopolymer-based nanogels has gained particular interest to achieve successful delivery of therapeutics for the treatment of various diseases, such as cancer, infection and diabetes. Herein, we report a new and simple methodology for the covalent stabilization of self-assembled gel nanoparticles based on hyaluronic acid (HA) modified with a thermoresponsive ketone-functional copolymer. This relies on the selective formation of hydrazone crosslinks with bishydrazides within the globular domains of the copolymer chains formed above the cloud point temperature. This approach allows tuning of the crosslinking density by varying the dihydrazide crosslinker to ketone molar ratio. The size distributions and morphology of the nanogels were assessed using dynamic light scattering (DLS), cryo-transmission and scanning electron microscopy. In vitro cellular uptake in several cancer cells and in vivo biodistribution of the nanogels in different mouse tumor models were then explored to assess the effectiveness of this crosslinking strategy. The data from these experiments show prolonged blood circulation, longer than 24 hours, for the crosslinked nanogels and high tumor accumulation.

Transiently Thermoresponsive Acetal Polymers for Safe and Effective Administration of Amphotericin B as a Vaccine Adjuvant.

The quest for new potent and safe adjuvants with which to skew and boost the immune response of vaccines against intracellular pathogens and cancer has led to the discovery of a series of small molecules that can activate Toll-like receptors (TLRs). Whereas many small molecule TLR agonists cope with a problematic safety profile, amphotericin B (AmpB), a Food and Drug Administration approved antifungal drug, has recently been discovered to possess TLR-triggering activity. However, its poor aqueous solubility and cytotoxicity at elevated concentrations currently hampers its development as a vaccine adjuvant. We present a new class of transiently thermoresponsive polymers that, in their native state, have a phase-transition temperature below room temperature but gradually transform into fully soluble polymers through acetal hydrolysis at endosomal pH values. RAFT polymerization afforded well-defined block copolymers that self-assemble into micellar nanoparticles and efficiently encapsulate AmpB. Importantly, nanoencapsulation strongly reduced the cytotoxic effect of AmpB but maintained its TLR-triggering capacity. Studies in mice showed that AmpB-loaded nanoparticles can adjuvant an RSV vaccine candidate with almost equal potency as a highly immunogenic oil-in-water benchmark adjuvant.

Coumarin-containing thermoresponsive hyaluronic acid-based nanogels as delivery systems for anticancer chemotherapy.

Multi-stimuli responsive nanogels based on biocompatible hydrophilic polymers have emerged as promising drug delivery systems to improve anticancer therapy with hydrophobic drugs, through increase of circulating-time in the bloodstream, tumor-targeting and reduction of systemic toxicity. This paper reports on the synthesis, characterization and biological perspectives of light- and thermoresponsive hyaluronic acid (HA)-based nanogels containing coumarin as the photocleavable group. Newly synthesized nanogels exhibited interesting features: formation by a temperature-triggered self-assembly process, successful incorporation of poorly water-soluble molecules, light-responsiveness as demonstrated by a significant shift in the critical aggregation temperature after light irradiation, efficient internalization by cancer cells overexpressing the CD44 receptor of HA, ability to circulate for a prolonged period of time in the bloodstream after intravenous injection in mice and considerable detection in tumor tissues. Our findings indicate that coumarin-containing HA-based nanogels may be promising delivery systems for anticancer chemotherapy.

Developments and future clinical outlook of taxane nanomedicines.

Taxanes are highly valuable drugs for cancer treatment. Low water-solubility however puts a major challenge in obtaining formulations that are stable and easy-to-use in clinical practice. Initially, solubilization and lowering toxicity of taxanes has been the main research focus. However, emerging passive and active targeting strategies, especially in the field of nanomedicine, have been capital incentives to further broaden therapeutic index by improving efficacy. This review provides an up-to-date clinical track record of taxane nanomedicines in view of the current state-of-the-art in anti-cancer drug delivery. Additionally, the clinical status of taxane nanomedicines is discussed and considerations are provided for improving future clinical translation.

Amphiphilic Ferrocene-Containing PEG Block Copolymers as Micellar Nanocarriers and Smart Surfactants.

An important and usually the only function of most surfactants in heterophase systems is stabilizing one phase in another, for example, droplets or particles in water. Surfactants with additional chemical or physical handles are promising in controlling the colloidal properties by external stimuli. The redox stimulus is an attractive feature; however, to date only a few ionic redox-responsive surfactants have been reported. Herein, the first nonionic and noncytotoxic ferrocene-containing block copolymers are prepared, carrying a hydrophilic poly(ethylene glycol) (PEG) chain and multiple ferrocenes in the hydrophobic segment. These amphiphiles were studied as redox-sensitive surfactants that destabilize particles as obtained in miniemulsion polymerization. Because of the nonionic nature of such PEG-based copolymers, they can stabilize nanoparticles even after the addition of ions, whereas particles stabilized with ionic surfactants would be destabilized by the addition of salt. The redox-active surfactants were prepared by the anionic ring-opening polymerization of ferrocenyl glycidyl ether, with PEG monomethyl ether as the macroinitiator. The resultant block copolymers with molecular weights (Mn) between 3600 and 8600 g mol-1 and narrow molecular weight distributions (Mw/Mn = 1.04-1.10) were investigated via 1H nuclear magnetic resonance and diffusion ordered spectroscopy, size exclusion chromatography, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Furthermore, the block copolymers were used as building blocks for redox-responsive micelles and as redox-responsive surfactants in radical polymerization in miniemulsion to stabilize model polystyrene nanoparticles. Oxidation of iron to the ferrocenium species converted the amphiphilic block copolymers into double hydrophilic macromolecules, which led to the destabilization of the nanoparticles. This destabilization of nanoparticle dispersions may be useful for the formation of coatings and the recovery of surfactants.

Micellar Paclitaxel-Initiated RAFT Polymer Conjugates with Acid-Sensitive Behavior.

Acid-sensitive paclitaxel (PTX)-polymer conjugates were designed by applying a grafting-from-drug RAFT approach. PTX was linked through either a cyclic or a linear, acid-sensitive acetal moiety. Relative to direct esterification of PTX, which occurred regioselectively at the C2' OH-group, direct acetalization was observed at either the C2' or the C7 OH-group of PTX. This yielded two regioisomers of acetal-based PTX-functionalized RAFT chain transfer agents (CTAs). Subsequent polymerization with N,N-dimethylacrylamide (DMA) resulted in amphiphilic highly defined, acetal-based PTX-polymer conjugates with nearly identical features in terms of polymer definition and micellar self-assembly behavior, but with distinct PTX release kinetics and absence of burst release. This was further reflected by their in vitro biological performance, giving insights into the difference of the release mechanism between ester- and acetal-based PTX-polymer conjugates.

Well-Defined Polymer-Paclitaxel Prodrugs by a Grafting-from-Drug Approach.

We report on the design of a polymeric prodrug of the anticancer agent paclitaxel (PTX) by a grafting-from-drug approach. A chain transfer agent for reversible addition fragmentation chain transfer (RAFT) polymerization was efficiently and regioselectively linked to the C2' position of paclitaxel, which is crucial for its bioactivity. Subsequent RAFT polymerization of a hydrophilic monomer yielded well-defined paclitaxel-polymer conjugates with high drug loading, water solubility, and stability. The versatility of this approach was further demonstrated by ω-end post-functionalization with a fluorescent tracer. In vitro experiments showed that these conjugates are readily taken up into endosomes where native PTX is efficiently cleaved off and then reaches its subcellular target. This was confirmed by the cytotoxicity profile of the conjugate, which matches those of commercial PTX formulations based on mere physical encapsulation.

pH-Degradable Mannosylated Nanogels for Dendritic Cell Targeting.

We report on the design of glycosylated nanogels via core-cross-linking of amphiphilic non-water-soluble block copolymers composed of an acetylated glycosylated block and a pentafluorophenyl (PFP) activated ester block prepared by reversible addition-fragmentation (RAFT) polymerization. Self-assembly, pH-sensitive core-cross-linking, and removal of remaining PFP esters and protecting groups are achieved in one pot and yield fully hydrated sub-100 nm nanogels. Using cell subsets that exhibit high and low expression of the mannose receptor (MR) under conditions that suppress active endocytosis, we show that mannosylated but not galactosylated nanogels can efficiently target the MR that is expressed on the cell surface of primary dendritic cells (DCs). These nanogels hold promise for immunological applications involving DCs and macrophage subsets.

Transiently Responsive Block Copolymer Micelles Based on N-(2-Hydroxypropyl)methacrylamide Engineered with Hydrolyzable Ethylcarbonate Side Chains.

The lack of selectivity and low solubility of many chemotherapeutics impels the development of different biocompatible nanosized drug carriers. Amphiphilic block copolymers, composed of a hydrophilic and hydrophobic domain, show great potential because of their small size, large solubilizing power and loading capacity. In this paper, we introduce a new class of degradable temperature-responsive block copolymers based on the modification of N-(2-hydroxypropyl)methacrylamide (HPMA) with an ethyl group via a hydrolytically sensitive carbonate ester, polymerized by radical polymerization using a PEG-based macroinitiatior. The micellization and temperature-responsive behavior of the PEG-poly(HPMA-EC) block copolymer were investigated by dynamic light scattering (DLS). We observed that the polymer exhibits lower critical solution temperature (LCST) behavior and that above the cloud point (cp) of 17 °C the block copolymer self-assembles in micelles with a diameter of 40 nm. Flow cytometry analysis and confocal microscopy show a dose-dependent cellular uptake of the micelles loaded with a hydrophobic dye. The block copolymer nanoparticles were capable of delivering the hydrophobic payload into cancer cells in both 2D and 3D in vitro cultures. The block copolymer has excellent cytocompatibility, whereas loading the particles with the hydrophobic anticancer drug paclitaxel results in a dose-dependent decrease in cell viability.

Sequence-selective DNA recognition and enhanced cellular up-take by peptide-steroid conjugates.

Several GCN4 bZIP TF models have previously been designed and synthesized. However, the synthetic routes towards these constructs are typically tedious and difficult. We here describe the substitution of the Leucine zipper domain of the protein by a deoxycholic acid derivative appending the two GCN4 binding region peptides through an optimized double azide-alkyne cycloaddition click reaction. In addition to achieving sequence specific dsDNA binding, we have investigated the potential of these compounds to enter cells. Confocal microscopy and flow cytometry show the beneficial influence of the steroid on cell uptake. This unique synthetic model of the bZIP TF thus combines sequence specific dsDNA binding properties with enhanced cell-uptake. Given the unique properties of deoxycholic acid and the convergent nature of the synthesis, we believe this work represents a key achievement in the field of TF mimicry.

Acid-Labile Thermoresponsive Copolymers That Combine Fast pH-Triggered Hydrolysis and High Stability under Neutral Conditions.

Biodegradable polymeric materials are intensively used in biomedical applications. Of particular interest for drug-delivery applications are polymers that are stable at pH 7.4, that is, in the blood stream, but rapidly hydrolyze under acidic conditions, such as those encountered in the endo/lysosome or the tumor microenvironment. However, an increase in the acidic-degradation rate of acid-labile groups goes hand in hand with higher instability of the polymer at pH 7.4 or during storage, thus posing an intrinsic limitation on fast degradation under acidic conditions. Herein, we report that a combination of acid-labile dimethyldioxolane side chains and hydroxyethyl side chains leads to acid-degradable thermoresponsive polymers that are quickly hydrolyzed under slightly acidic conditions but stable at pH 7.4 or during storage. We ascribe these properties to high hydration of the hydroxy-containing collapsed polymer globules in conjunction with autocatalytic acceleration of the hydrolysis reactions by the hydroxy groups.

Stapling monomeric GCN4 peptides allows for DNA binding and enhanced cellular uptake.

The basic DNA recognition region of the GCN4 protein comprising 23 amino acids has been modified to contain two optimally positioned cysteines which have been linked and stapled using cross-linkers of suitable lengths. This results in stapled peptides with a stabilized α-helical conformation which allows for DNA binding and concurrent enhancement of cellular uptake.

Degradable ketal-based block copolymer nanoparticles for anticancer drug delivery: a systematic evaluation.

Low solubility of potent (anticancer) drugs is a major driving force for the development of noncytotoxic, stimuli-responsive nanocarriers, including systems based on amphiphilic block copolymers. In this regard, we investigated the potential of block copolymers based on 2-hydroxyethyl acrylate (HEA) and the acid-sensitive ketal-containing monomer (2,2-dimethyl-1,3-dioxolane-4-yl)methyl acrylate (DMDMA) to form responsive drug nanocarriers. Block copolymers were successfully synthesized by sequential reversible addition-fragmentation chain transfer (RAFT) polymerization, in which we combined a hydrophilic poly(HEA)x block with a (responsive) hydrophobic poly(HEAm-co-DMDMAn)y copolymer block. The DMDMA content of the hydrophobic block was systematically varied to investigate the influence of polymer design on physicochemical properties and in vitro biological performance. We found that a DMDMA content higher than 11 mol % is required for self-assembly behavior in aqueous medium. All particles showed colloidal stability in PBS at 37 °C for at least 4 days, with sizes ranging from 23 to 338 nm, proportional to the block copolymer DMDMA content. Under acidic conditions, the nanoparticles decomposed into soluble unimers, of which the decomposition rate was inversely proportional to the block copolymer DMDMA content. Flow cytometry and confocal microscopy showed dose-dependent, active in vitro cellular uptake of the particles loaded with hydrophobic octadecyl rhodamine B chloride (R18). The block copolymers showed no intrinsic in vitro cytotoxicity, while loaded with paclitaxel (PTX), a significant decrease in cell viability was observed comparable or better than the two commercial PTX nanoformulations Abraxane and Genexol-PM at equal PTX dose. This systematic approach evaluated and showed the potential of these block copolymers as nanocarriers for hydrophobic drugs.

Thermoresponsive hyaluronic acid nanogels as hydrophobic drug carrier to macrophages.

Delivery systems for macrophages are particularly attractive since these phagocytic cells play a important role in immunological and inflammatory responses, also acting as host cells for microorganisms that are involved in deadly infectious diseases, such as leishmaniasis. Hyaluronic acid (HA) is specifically recognized by macrophages that are known to express HA receptors. Therefore, in this study, we focused on HA-based nanogels as drug carriers for these cells. The drug delivery was validated in an in vivo study on mice using intravital two-photon laser scanning microscopy. HA derivatives were modified with a biocompatible oligo(ethylene glycol)-based thermoresponsive polymer to form nanogels. These HA conjugates were readily prepared by varying the molar mass of initial HA and the degree of substitution via radical-mediated thiol-ene chemistry in aqueous solution. The derivatives were shown to self-assemble into spherical gel particles with diameters ranging from 150 to 214 nm above 37 °C. A poorly water-soluble two-photon dye was successfully loaded into the nanogels during this self-assembly process. In vitro cellular uptake tests using a RAW 264.7 murine macrophage cell line showed successful intracellular delivery of the hydrophobic dye. After intravenous injection in mice, the nanogels circulated freely in the blood but were rapidly phagocytized within 13 min by circulating macrophages and stored in the liver and spleen, as observed by two-photon microscopy. Benefit can be thus expected in using such a delivery system for the liver and spleen macrophage-associated diseases.

Magnetically engineered microcapsules as intracellular anchors for remote control over cellular mobility.

Living cells are anchored with magnetic microcapsules that allow in vitro manipulation via a magnetic field.